How to Install Vinyl Plank Flooring

Installing Vinyl plank flooring is one of the best alternatives to hardwood flooring any homeowner can consider. In addition to being very affordable for every homeowner, vinyl flooring is really easy to install as well. There are still lots of tricks you can use to install vinyl flooring in the best way possible without making any mistakes. Visit websites like Floor Mod! for more details.

Preparing The Floor

One of the major considerations you will have to make when installing vinyl flooring is that the floor should be flat. However, the level of your floor is not so important as the floor again is still flat and on an incline. You will also need to clean the floor properly prior to starting the installation procedure.

However, if you cannot easily scrape off the materials from the floor, you might have to use a floor scraper or a floor grinder depending on the type of hardness of the material stuck to it. Moreover, if you are working with vinyl planks which are installed by using a glue primer, The manufacturer might include the primer with the product.


Whenever you encounter door frames during vinyl plank installation, you will have to undercut the door frames in order to install vinyl flooring in a seamless way. That is why you will have to invest in an undercutting saw. This all can either be manual or powered by electricity or fuel. You will also have to cut the baseboard in some areas in which it is applied already.

Use Perimeters Wisely

No matter what type of material you use when installing vinyl planks on your floor, the material will breathe with the weather. For example, it will contract during the winter and expand during summer time. So, you will have to introduce reasonable gaps around the parameters in order to allow the vinyl to breathe properly. In clearly visible areas, you should leave an ⅛ inch gap around the perimeter to make your work look fine.